TBUS-1Axl - Installing the TBUS-1Axl
17
17
2. Secure the cables to the tie holes on the
TBUS-1Axl
.
Do not secure the cables too tightly or too loosely. Leave a small amount of
slack.
5.6
Inserting the Pass-through Cables
To insert the pass through cables (for example, to connect a laptop) do the following:
1. Remove the two screws attaching the split pass-through bracket.
2. Remove the split grommet.
3. Insert the cable through the rectangular opening.
4. Open the split grommet slightly and insert the required cables.
5. Place the split bracket around the grommet and position this assembly over
the inner frame.
6. Place the two screws appropriately and tighten the split bracket together
with the grommet and inserted cables to the inner frame.
7. Insert the self-locking ties through the tie holes to secure the cables to the
inside walls of the enclosure.
Figure 10: Cable Pass-through Insert (P/N: 80-000399)
