KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your TP-575 HDMI Line Receiver / DA
6
4 Your TP-575
HDMI Line Receiver / DA
Figure 1
and
Table 1
define the
TP-575
HDMI Line Receiver / DA
:
Figure 1: TP-575 HDMI Line Receiver / DA
Table 1: TP-575 HDMI Line Receiver / DA Features
#
Feature
Function
1
EDID SETUP
Button
Press briefly to determine the type of EDID stored in the non-
volatile memory
Press and hold to select the desired EDID setup and then release
to acquire EDID (see section
5.3
)
2
IN
LED
Illuminates when an input is connected
3
OUT 1
(LINE)
LED
Illuminates when OUT 1 is connected and active
Blinks when the monitor does not support HDCP
1
4
OUT 2 (HDMI)
LED
Illuminates when OUT 2 is connected and active
Blinks when the monitor does not support HDCP
1
5
ON
LED
Illuminates when receiving power
6
LINE IN
RJ-45
Connector
Connects to the CAT 5 OUT RJ-45 connector on the
PT-571
7
OUT 1
(
LINE)
RJ-45
Connector Connects to the CAT 5 IN RJ-45 connector on the
PT-572+
8
OUT
2 (
HDMI)
Connector
Connects to the HDMI acceptor
9
12V DC
+12V DC connector for powering the unit
5 Using the TP-575 HDMI Line Receiver / DA
This section describes how to:
•
Connect the
TP-575
(see section
5.1
)
•
Wire the twisted pair RJ-45 connectors (see section
5.2
)
•
Use the EDID SETUP button (see section
5.3
).
1 This LED also illuminates or blinks during EDID setup (see section
5.3
)
