background image

Kramer Electronics Ltd. 

 

KWC-1 

– Introduction 

 

Introduction 

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world 
of unique, creative, and affordable solutions to the vast range of problems that confront video, 
audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have 
redesigned and upgraded most of our line, making the best even better! 

Getting Started 

We recommend that you: 

  Unpack the equipment carefully and save the original box and packaging materials for 

possible future shipment. 

  Review the contents of this user manual. 

 

Go t

www.kramerav.com/downloads/KWC-1

 to check for up-to-date user manuals, 

application programs, and to check if firmware upgrades are available (where appropriate). 

 

Achieving the Best Performance 

To achieve the best performance: 

  Use only good quality connection cables (we recommend Kramer high-performance, 

high-resolution cables) to avoid interference, deterioration in signal quality due to poor 
matching, and elevated noise levels (often associated with low quality cables). 

  Do not secure the cables in tight bundles or roll the slack into tight coils. 

  Avoid interference from neighboring electrical appliances that may adversely influence 

signal quality. 

  Position your Kramer 

KWC-1

 

away from moisture, excessive sunlight and dust. 

Safety Instructions 

 

Caution: 

 This equipment is to be used only inside a building. It may only be connected to other 

equipment that is installed inside a building. 

 For products with relay terminals and GPI\O ports, please refer to the permitted rating 

for an external connection, located next to the terminal or in the User Manual. 

 There are no operator serviceable parts inside the unit. 

 

 

Recycling Kramer Products 

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce 
the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected 
and recycled. To comply with the WEEE Directive, Kramer Electronics has made 
arrangements with the European Advanced Recycling Network (EARN) and will cover any 

  

  

Summary of Contents for KWC-1














Reviews: