Kramer Electronics Ltd.
KT-107, KT-107RB - Mounting the KT-107, KT-107RB
17
4. Insert the 4 M2x4 screws (supplied) and tighten.
Figure 13: Attaching the Panel Mount Plate to the Rear Side of the KT-107
5. Connect the flat cable between the on-wall mount and the
KT-107
.
Figure 14: Connecting the On-wall Mount Flat Cable
If you need to secure the
KT-107
to the wall, use the Kramer
KT-107-OWLK
(purchased
separately).
For installation instructions, see