To attach
KRT-4
to a TBUS:
1. From under the table, slide the
KRT-4
onto one of the
side walls of the TBUS.
Make sure that the fixed cable is directed downwards
and the retracting cable is directed upwards.
2. Use the wing-head thumb screw to fix the
KRT-4
firmly in
place and pass the retracting cable end through the
cable pass-through bushing.
The
KRT-4
is now firmly fixed in place.
Attaching KRT-4 (as a Standalone) to the Underside of a Table
The thickness of the table should be at least 18mm so as not
to damage the table. Kramer Electronics is not responsible
for any damage caused to the table.
To attach KRT-4 to the underside of a table:
1. Place the
KRT-4
under the table in the desired location.
Make sure that the retracting cable faces the edge of the
table.
2. Pass the 3 M4x50 screws through the table screw
openings and tighten them to fix the retractor under the
table.
