Kramer Electronics Ltd.
KN-DSP100
– Defining KN-DSP100 Kramer Network Powered Server with DSP
4
Defining KN-DSP100 Kramer
Network Powered Server with
DSP
This section defines
KN-DSP100
.
Figure 1: KN-DSP100 Kramer Network Powered Server with DSP
#
Feature
Function
Indicator LEDs
Flashes to indicate fan failure.
Lights continuously to indicate system overheat.
Flashes when there is network activity on LAN port 2.
Flashes when there is network activity on LAN port 1.
Flashes to indicate hard drive activity.
Lights when the device is powered.
Reset Button
Use to reboot the system.
Power Button
Use to toggle setting the device to standby mode / turning the
device on.
To turn the power off, disconnect the power connector from
the mains.
Power Socket
Connect to the power cord and to the mains electricity.
RS-232 9-pin D-sub Connector
Connect to a system controller.
USB 2.0 Ports (2)
Connect to a keyboard and mouse (if required).
IPMI (Intelligent Platform Management
Interface) LAN RJ-45 Connector
Use for remote access.
USB 3.0 Ports (2)
Connect to USB devices.
LAN 1 ETHERNET RJ-45 Connector
Connect to a switcher/router for audio streaming
(Dante™).
LAN 2 ETHERNET RJ-45 Connector
Connect to the Ethernet.
VGA 15-pin HD Connector
Connect to a display.