Kramer Electronics Ltd.
KDS-EN7, KDS-DEC7
– Using KDS-EN7 Embedded Web Pages
30
KDS-EN7 Network Settings
The device enables performing the following actions:
•
•
Defining IP Casting Mode Setting
and TTL on page
•
Defining Interface Settings
Define interface settings for each of the Ethernet ports.
To define interface settings:
1. In the Navigation pane, Select
Device Settings
. The General tab in the Device Settings
).
2. Select the
Network
tab. The Network tab appears.
Figure 18: Device Settings
– Network Tab
3. Set the Media port Stream service parameters:
▪
DHCP mode
– Set DHCP to
On
(default) or
Off
.
▪
IP Address
– When DHCP mode is set to Off, the device uses a static IP address.
This requires entering mask and gateway addresses.
▪
Mask Address
– Enter subnet mask.
