KDS-EN5, KDS-DEC5 Quick Start
(P/N: 2900-300906QS REV 1)
P/N:
2 9 0 0 - 3 0 0 9 0 6 QS
Rev:
1
Scan for full manual
KDS-EN5, KDS-DEC5 Quick Start Guide
This guide helps you install and use your
KDS-EN5, KDS-DEC5
for the first time.
www.kramerav.com/downloads/KDS-EN5
to download the latest user manual and check if
firmware upgrades are available.
Step 1: Check w
hat’s in the box
KDS-EN5
4K Video Encoder / Streamer OR
KDS-DEC5
4K Video Decoder
4 Rubber feet
1 Bracket set
1 Quick start guide
Step 2: Get to know your KDS-EN5, KDS-DEC5
KDS-EN5
KDS- DEC5
#
Feature
Function
1
POWER LED Indicator (on top of unit)
Lights when the unit is powered on.
2
STATUS LED Indicator (on top of unit)
Lights when unit is functioning properly.
3
ID Button (
KDS- DEC5
)
Press to display the encoder and decoder information, such as device IP
address and ID, on the screen.
4
DC 12V Connector
Connect to a 12V power adapter (optional
– when power is not supplied by
PoE).
5
LAN (POE) RJ-45 Connector
Connect to a PC via a LAN to control the unit and to receive power via PoE.
6
AUDIO OUT 3-pin Terminal Block
Connect to an unbalanced audio acceptor.
7
HDMI IN (
KDS-EN5
) / OUT (
KDS-DEC5
)Connector
Connect to an HDMI source/acceptor.
8
RS-232 3-pin Terminal Block Connector
Connect to an external device (e.g. a camera or display screen) that can be
controlled via the IP controller SW / API.S
9
RESET Button
Press and hold for about 8 seconds to reset to factory default settings.
