KC-BRAINware-50
Quick Start
P/N: 2 9 0 0 - 3 0 1 3 3 5 QS
Rev: 2
Scan for full manual
KC-BRAINware-50 Quick Start Guide
This guide helps you install and use your
KC-BRAINware-50
for the first time.
www.kramerav.com/downloads/KC-BRAINware-50
to download the latest user manual and check if
firmware upgrades are available.
Step 1:
Check what’s in the box
KC-BRAINware-50
Kramer Control server
1 VGA to HDMI™ cable adapter
1 Set of rack ears
2 Power cords (US + European)
1 Quick start guide
Step 2: Get to know your KC-BRAINware-50
#
Feature
Function
1
Indicator LEDs
Flashes to indicate fan failure.
Lights continuously to indicate system overheat.
Flashes when there is network activity on LAN port 2.
Flashes when there is network activity on LAN port 1.
Flashes to indicate hard drive activity.
Lights when the device is powered.
2
Reset Button
Use to reboot the system.
3
Power Button
Use to toggle setting the device to standby mode / turning the device on.
To turn the power off, disconnect the power connector from the mains.
4
Power Socket
Connect to the power cord and to the mains electricity.
5
RS-232 9-pin D-sub Connector
Connect to a system controller.
6
USB 2.0 Ports (2)
Connect to a keyboard and mouse (if required)
7
IPMI (
Intelligent Platform Management
Interface
) LAN RJ-45 Connector
N/A
8
USB 3.0 Ports (2)
Connect to USB devices.
9
LAN 1 ETHERNET RJ-45 Connector
Connect to the Ethernet.
10
LAN 2 ETHERNET RJ-45 Connector
Connect to the Ethernet.
11
VGA 15-pin HD Port
Connect to a display.
