Kramer KADS-1, User Manual

Page: 17 / 73

KADS-100/KADS-1/KADS-2 - Defining the KADS-100, KADS-1 and KADS-2 9
9
4.2 Defining the KADS-1 or a KADS-2
Figure 3 defines the rear panel of the KADS-1 .
Figure 3: KADS-1 Rear Panel
# Feature Function
1
SPEAKERS
CHAIN
IN 2-Pin
Connector
Connect to the + and
–
speaker output of a KADS-1,
KADS-2 or KADS-100, (see Section
6
)
2 OUT 2-Pin
Connector
Connect to the + and
–
speaker input of another
KADS-1 or KADS-2
3
LAST Switch
Push to the right when this speaker is the last in the chain,
push to the left when there are additional speakers
connected to OUT
4 LINK LED Lights green when the device is connected to a source
5 RS-232 3-pin Terminal Block For the use of Kramer service personnel only
6 USB (Program) Connector Connect a USB flash-drive to perform a firmware upgrade,
(see
Section
9
)
7 SPEAKER ID 10 Position
Rotary Switches
Sets the tens and units of the device ID, (see Section
7
)
Note : ID 0 is reserved for system use