2
K-Speak Bluetooth Speakerphone
K-Speak Bluetooth Speakerphone
Congratulations on purchasing your Kramer
K-Speak
high performance
Bluetooth Speakerphone
.
K-Speak
supports a 360° omni-direction audio pickup in a radius of up to 5 meters (when unobstructed) and enables the user
to connect to up to 2 devices via Bluetooth, AUX (using the
K-Speak
Cascade cable, purchased separately) or USB.
K-Speak
also features auto echo cancellation, auto noise suppression and auto audio gain and can be charged (via
USB or a wireless charger, for example, using the Kramer
TBUS-1-KWC
or
KWC-1
charging spots) to perform for up
to 8 hours at a time (depending on battery consumption and the environment).
Get to know your K-Speak
#
Feature
Function
1
+ Volume Button
Press to increase the volume level.
2
- Volume Button
Press to decrease the volume level.
3
Bluetooth Button
When Bluetooth is not connected, press and hold to turn it on.
When Bluetooth is connected, press and hold to disconnect the current Bluetooth
connection.
Flashes blue when waiting for Bluetooth connection and lights blue when paired.
Flashes white when signal is enhanced via Bluetooth adapter and lights white
when Bluetooth feature is turned off.
4
Microphone Mute Button
Press to mute the microphone input.
5
Call Button
Press to answer / hang-up a call.
6
Power Button
Press and hold for 2 seconds to turn the device ON/OFF.
Press and hold for 8 seconds to reset the system.
Press shortly to view the charging status (via the 5-step light bar located between
the + and
– buttons).
Flashes red when charging is required (together with a short audio prompt).
Flashes white when the device is charging.
Lights green when fully charged
7
IN/OUT 3.5mm Mini Jack
Connect to an audio source/acceptor or connect to an additional
K-Speak
device,
using the supplied AUX cable.
When
K-Speak
power is on, and a second unit is connected, the first
connected device is defined as the master device and the second one is
the slave.
If you connect the AUX cable to the devices before powering them, the
first unit powered is the master and the second is the slave.
All the device features are enabled on the Master device and disabled on
the slave device.
8
USB Type-C Port (5V=2A) Connect to a USB device (for example, a PC) and/or use to charge the
K-Speak
.
