To attach K-POD302 to the table surface:
1. Place the
K-POD302
on the table in
the desired location (if you cut a hole
in the table, fit the underside opening
to that hole).
2. Pass the 2 M4x
1/2” screws (supplied)
through the table screw openings and
tighten them to fix the
K-POD302
to the
table.
Step 4: Attach RC-74DL to the K-POD302
RC-74DL
is used here as an example. Other 3-gang Kramer products can also be mounted in
K-POD302
.
To attach RC-74DL to the K-POD302:
1. Connect the cables to the rear panel of the
RC-74DL
and pass the cables through the
cables opening.
2. Place the
RC-74DL
panel over the
K-POD302
frame and pass the 4 M3x8
screws (supplied) through the
RC-74DL
holes and mounting screw openings and
tighten them.
3. Position the
RC-74DL
faceplate over the
panel and tighten with the 4
RC-74DL
faceplate screws (supplied with
RC-74DL
).
