Kramer K-CONFIG User Manual Download Page 143

Page: 143 / 188

136

K-CONFIG - Adding Actions to a Trigger

Add the command to the Action list:

Figure 260: The Table Port Command – Added to the Action List

You can create several other tables for different commands, or combine different command levels in the same table.

9.3

Adding a Port Switch Action

The port switch action lets you open/close relay ports or GPI/O configured as digital outputs on the master room

controller and auxiliary devices or control gateways.

Figure 261: Selecting the Port Switch Action Type

Select the port and check the desired action (Open or Close) and add to the action list:

Figure 262: Port Switch Action Type added to the Action List

Summary of Contents for K-CONFIG





























































































































































































Search results

Summary of Contents for K-CONFIG

Reviews:

Related manuals for K-CONFIG

Brands by name

Popular brands

Kramer K-CONFIG, User Manual

Search results

Summary of Contents for K-CONFIG

Reviews:

Related manuals for K-CONFIG

Brands by name

Popular brands