Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your
K-CamHD
.
Control K-CamHD via the IR Remote Controller.
#
Key
Function
Shortcut Keys
*
+
＃
+
1
: OSD default (English)
*
+
＃
+
3
: OSD default (Chinese)
*
+
＃
+
6
: Quickly recover the default
*
+
＃
+
8
: View the camera version
*
+
＃
+
9
: Quickly set up inversion
*
+
＃
+
MANUAL
: Restore
default IP address
1
Power
Press once to enter standby mode. Press again to enter normal
operation mode.
2
Number (0 to 9)
Configure or edit a preset
3
*
Use together with other keys for various functions.
4
PRESET
Press a numerical key (0 to 9) to save the current
configuration to that preset number.
5
HOME
Press to return
K-CamHD
to its default position.
When in the OSD, press to enter a submenu or confirm menu.
6
Return
Return to previous item on the menu.
7
ZOOM
SLOW
Press for slow zoom in (+) or out (-).
FAST
Press for quick zoom in (+) or out (-).
8
L/R
Set
STD (1)
Press L/R
+ STD (1) keys to set Pan-Tilt to same direction as L/R
setting.
REV (2)
Press L/R
+ REV (2) keys to set Pan-Tilt to the direction opposite to
the L/R setting.
9
FOCUS
AUT
O
Press to automatically set the focus to the center of the
image.
MAN
UAL
Press to enter manual focus mode. Then press FAR or
NEAR.
FAR
When in MANUAL mode, press to focus on a far object
NEA
R
When in MANUAL mode, press to focus on a near object.
10
CAMERA
SELECT
Select the camera to configure and control (1 to 4).
11
#
Use together with other keys for various functions.
12
IR RC
Press * + # + (F1 to F4) to assign a camera address to the remote.
For example, point the remote to a camera, press *+#+F1. The
remote assigns CAMERA SELECT 1 key to this camera. To use the
remote to control camera 1 press the CAMERA SELECT 1 key.
Press F4 to freeze the image.
13
RESET
Press RESET+ a key number (0 to 9) to delete a preset
configuration. Press *+#+RESET to delete all preset configurations.
14
PTZ Control
Control camera panning and tilting using arrow keys (left, right, up,
and down).
15
MENU
Enter/exit OSD menu.
16
BACKLIGHT
Press to turn backlight compensation on or off.
Available when exposure mode is set to Auto (via the OSD menu).
17
P/T RST
Press to self-check preset Pan/Tilt on camera.
