K-Able/XL Box - Mounting the K-Able/XL Box
7
7
To mount a single
K-Able/XL Box
vertically in a TBUS unit as illustrated in the
example in
Figure 2
:
1. Remove the blanking plate from the required position in the TBUS unit.
2. From the underneath of the TBUS unit, insert the extendable cable end of
the
K-Able/XL Box
and align it with the mounting holes in the TBUS unit
plate. Where conditions dictate, unlock the hinged top of the
K-Able/XL Box
(as shown in
Figure 3
) to make it easier to manipulate the
K-Able/XL Box
into position.
Figure 3: Hinged Top Shown Open
3. Secure the
K-Able/XL Box
to the TBUS plate using the two countersunk,
machine screws supplied.