Galil 6-CO - Installing the Open-back Ceiling Speakers
9
9
Figure 5: Closed-back Ceiling
Speaker Schematic Pinout Diagram
6. Insert the speaker into the opening and tighten the screws.
When tightening the screws, the tabs automatically turn outward, thus
clamping the speaker to the wall from its rear side.
Do not over-tighten the screws. It may cause damage to both the
speakers and the surface.
7. Push the grille firmly into the slot in the speaker baffle.
5.3.1
Using the Suspended Ceiling Speaker Mounting Kit (Optional)
To install the Open-back ceiling
speakers using the mounting kit, do the following:
1. Place the C-
ring over the hole cut in the ceiling tile (on the “ceiling” side).
Place it around the hole so that the tabs are located in parallel to the tile
edges (see
Figure 6
).
i
