Kramer Electronics Ltd.
FC-46H2
– Defining FC-46H2 4K HDMI Audio De-Embedder
4
Defining FC-46H2 4K HDMI Audio
De-Embedder
This section defines
FC-46H2
.
Figure 1: FC-46H2 4K HDMI Audio De-Embedder Front Panel
#
Feature
Function
PROG Mini USB Port
Connect to a PC to perform firmware upgrades (via K-Upload)
and work with the EDID Designer.
K-Upload and EDID Designer can be downloaded from our web
site at:
www.kramerav.com/downloads/FC-46H2
To use the mini USB port, you need to download the Kramer
USB driver from our web site at:
www.kramerav.com/support/product_downloads.asp
SETUP 4-way DIP-switch
).
All the DIP-switches are set to off (up) by default.
AUDIO
SOURCE
Selector Button
Press to route the audio source from HDMI IN or from HDMI OUT
(ARC) to the audio outputs.
IN LED
Lights green when HDMI IN is selected.
OUT LED
Lights green when HDMI OUT is selected (ARC).
AUDIO OUT
LEDs
DIGITAL
Lights green when a de-embedded audio signal is present on the
S/PDIF output.
ANALOG
Lights green when a de-embedded audio signal is present on the
ANALOG audio output.
ON LED
Lights green when powered.
HDMI
™ IN Connector
Connect to an HDMI source.
HDMI
™ OUT Connector
Connect to an HDMI acceptor.
AUDIO OUT
Connectors
ANALOG 5-pin
Terminal Block
Connect to an analog audio acceptor.
S/PDIF RCA
Connect to a digital audio acceptor.
MUTE 2-pin Terminal Block
Connector
Connect the MUTE pin to GND to mute the analog audio output.
5V DC Power Connector
Connect to the Kramer power adapter.
1
2
3
4
5
6
7
8
9
10
11