![background image](http://html1.mh-extra.com/html/kramer/fc-17/fc-17_quick-start-manual_2001536001.webp)
FC-17 Quick Start (P/N: 2900-300840QS REV 2)
P/N:
2900- 300840QS
Rev:
2
Scan for full manual
FC-17 Quick Start Guide
This guide helps you install and use your
FC-17
for the first time.
Go to
www.kramerav.com/downloads/FC-17
to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
FC-17
4K HDMI Converter Tool
1 Power supply (5V DC)
TOOL Mounting bracket kit
4 Rubber feet
1 Quick start guide
Step 2: Get to know your FC-17
#
Feature
Function
1
SAMPLING INPUT LEDs
Indicate the input chroma sub-sampling and color space
2
SAMPLING OUTPUT LEDs
Indicate the output chroma sub-sampling and color space
3
HDCP INPUT LEDs
Indicate the input HDCP standard
4
HDCP OUTPUT LEDs
Indicate the output HDCP standard
5
ON
LED
Lights green when the unit is powered on; changes to red to indicate that a successful USB
LINK is established via the EDID Manager software
6
HDMI IN Connector
Connect to an HDMI source
7
HDMI OUT Connector
Connect to the HDMI acceptor
8
EDID DIP-Switches
DIP 1 (INT): When ON (down), the source sees the internal default EDID
DIP 2 (EXT): When ON (down), the source reads the EDID of the acceptor that is connected
to the HDMI output
DIP 3 (USER): When ON (down), the source reads a user-defined EDID
Note
: For normal operation, only one EDID DIP-switch should be set to ON (down)
9
YPbPr/420 DIP-Switch
When ON:
4K50/60 YPbPr 4:4:4 signals are converted to 4:2:0
4K50/60 RGB signals are converted to YPbPr 4:2:0
Resolutions other than those above are bypassed
10
PROG USB Port
Connect to a PC for programming use with the application software and for firmware upgrade.
11
Recessed Pushbutton
Use for the upgrade process
12
5V DC
+5V DC connector for powering the unit