Kramer FC-132ETH, User Manual, Page: 24 / 61

20 FC-132ETH - Operating the FC-132ETH Locally
8 Operating the FC-132ETH Locally
This section describes:

Switching a Data connection to an output Port (see Section
‎8.1
)

Locking the front panel buttons (see Section
‎8.2
)
8.1 Switching a Data Connection to an Output Port
To switch a Data connection to an output Port :
1. Select the required output Port using the + and
–
Port buttons.
The Data buttons flash and the selected output is displayed on the readout.
2. Select the required input Data connection using the + and
–
Data buttons.
The selected Data connection is displayed on the readout and the Take
button flashes.
3. Press Take/Lock to save the selection.
If you do not press the Take/Lock button within 30 seconds the selection is
not saved and the display reverts to the standby blank display.
8.2 Locking and Unlocking the Front Panel Buttons
To lock and unlock the front panel buttons:
1. Press and hold the unlit Take/Lock button for five seconds.
The front panel buttons are locked. Pressing any of the front panel buttons
causes the Lock button to flash a few times.
2. Press and hold the lit Take/Lock button for five seconds.
The front panel buttons are unlocked.