Kramer FC-10ETH User Manual Download Page 4

 

FC-10ETH - Introduction 

 

1.1 Terminology Used in this User Manual 

Term 

Definition 

802.3  

The standard specification for ETHERNET that is maintained by the Institute of 

Electrical and Electronics Engineers (IEEE). 

Dynamic Host 

Configuration 

Protocol (DHCP) 

Allows the network administrator to distribute IP addresses from a central point and 

automatically send a new IP address when an Ethernet point is plugged into a 

different network location. 

Gateway 

A network position serving as an entry to another network. On the Internet, a node 

or stopping point can be either a gateway node or a host (end-point) node. 

IP Address 

A 32-binary digit number that identifies each sender or receiver (within a network via 

a particular server or workstation) of data (HTML pages or e-mails) that is sent in 

packets across the Internet. Every device connected to an IP network must have a 

unique IP address. This address is used to reference the specific unit.  

Local Area 

Network (LAN) 

Computers sharing a common communications line or wireless link, which often 

share a server within a defined geographic area. 

Media Access 

Control (MAC) 

Address 

A computer's unique hardware number (or address) in a LAN or other network. On 

an Ethernet LAN, the (MAC) address is identical to the Ethernet address. 

Transmission 

Control 

Protocol/Internet 

Protocol (TCP/IP) 

The basic communication language or protocol of the Internet that breaks the 

message into appropriately sized packets for the network, and can be used as a 

communications protocol in an intranet or an extranet. 

 

im Vertrieb von            CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201
Fax 07131 911203

[email protected]

Summary of Contents for FC-10ETH


























Reviews: