Kramer Electronics Ltd.
DSP
‑
1
– Protocol 3000
31
AUD-SIGNAL
Functions
Permission
Transparency
Set:
–
–
–
Get
AUD-SIGNAL?
End User
Public
Description
Syntax
Set:
–
–
Get:
Get audio input signal status
#AUD-SIGNAL?
SP
inp_id
CR
Response
~
nn
@AUD-SIGNAL
SP
inp_id
,
status
CR LF
Parameters
Inp_id
– input number:
1
(IN 1),
2
(IN 2)
status
–
0
(OFF, no signal),
1
(ON, signal present)
Response Triggers
After execution, response is sent to the com port from which the Get was received
Response is sent to all com ports if audio status state was changed on any input
K-Config Example
get the status of IN 1:
“#AUD
-
SIGNAL? 1”,0x0D
BALANCE
Functions
Permission
Transparency
Set:
BALANCE
End User
Public
Get:
BALANCE?
End User
Public
Description
Syntax
Set:
Set balance level
#BALANCE
SP
channel
,
balancelevel
CR
Get:
Get balance level
#BALANCE?
SP
channel
CR
Response
~
nn
@BALANCE
SP
channel
,
balance_level
CR LF
Parameters
channel
–
1
(LINE OUT)
balancelevel
–
-15
to
+15
(audio parameter in Kramer units, minus sign precedes negative values)
++ increase current value
-- decrease current value
K-Config Example
Set the LINE OUT balance to +12:
“#BALANCE 1,12”,0x0D