DS Vision® Digital - Serial Control
11
6
Serial Control
To enable serial control of remote displays:
1.
Connect a serial (9-pin D-sub male/female) cable between the players and
the broadcaster/transmitter.
2.
Connect a serial (9-pin D-sub female/female) cable between the receiver
and the screen.
Figure 9
illustrates the connections:
Figure 9: Serial Control
When using a broadcaster, the serial command is broadcasted to all the displays.
In order to send a quarry command to a specific display, make sure to place the
relevant screen ID in the serial command.
Note!
In order to address a specific display, make sure the display
suppor
ts “ID mode”.
System cable
Up to 100m/330ft
Player
HDMI cable
HDMI or DP cable
Receiver
D
S
V
is
io
n
D
ig
it
a
l
R
E
C
E
IV
E
R
M
IN
IC
M
d
ig
it
a
l
s
ig
n
a
g
e
Transmitter/
Broadcaster
Serial cable
Serial cable
i