KRAMER: SIMPLE CREATIVE TECHNOLOGY
Setup and Installation
4
4.1 Connections on the Cobra TWA
The
Cobra TWA
transmitter supports video and audio signals over CAT5
cable. The audio signal is line-level R/L summed and powered speakers are
required. Figure 1 shows the
Cobra TWA
transmitter connections.
Figure 1: Connecting the Cobra TWA Transmitter
4.2 Installing the Cobra TWA
The
Cobra TWA
transmitter can be installed into a 1 gang electrical wall box
and fits a standard Decora wall plate cover.
The installation must conform to national and local electrical codes.
4.3 Powering the Cobra TWA
The
Cobra TWA
is designed to be powered by a 12VDC power supply.
NOTE:
Observe proper polarity when connecting the power supply to the unit.
Ensure the po lead is connected to the po side of the
connector. Incorrectly wiring the power connector will damage the unit.