Setup and Installation
5
With regard to connecting the cables:
We recommend mounting and connecting all cabling to the
Cobra
R1300A / R1300S2 / R1300S2M
components before applying power.
Be sure that the CAT 5 cable you intend to use has been tested to comply
with the T568B wiring specification (see Appendix A).
4.3 Connections on the Single-Port VGA/Audio
The single-port units with audio support video and audio signals over CAT 5
cable. The audio signal is line-level summed Right/Left audio, and powered
speakers are required. You can also use the transmitters and receivers to make
video-only connections without audio. Figure 1 shows the Single-Port
Cobra
CAT 5 Video System with Audio Transmitter connections, and Figure 2
shows the receiver connections.
Figure 1: Transmitter Connections
Figure 2: Cobra R1300A Video / Audio Receiver Connections
Summary of Contents for Cobra R1300A
Page 19: ...17 ...
