KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the C-FODPM/FODPM Optical DP Extension Cable
6
Figure 2: Connecting the C-FODPM/FODPM Optical DP Extension Cable
5.2 Avoiding Pitfalls using the C-FODPM/FODPM Cable
If the display device shows only a black screen:
•
Make sure that all the AC and DC plugs and jacks used by the external
power supplies are firmly connected
•
Be sure that the DP ports are firmly plugged into the computer and the
display device, and be sure that the Transmitter and Receiver modules are
correctly plugged into the computer and display device, respectively
•
Check if the computer and display are powered ON and properly booted
•
Reset the system by unplugging and then replugging the Transmitter DP
port or Receiver DP port and then reboot the system
If the screen is distorted or displays noise, disconnect and reconnect the optical
cables.
Be sure that at all times the cables are stored and used away from liquid or dirt
