KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using Your Optical DVI Extension Cable
2
Figure 1: Optical DVI Extension Cable
3.1 System Requirements for Setup (Hardware)
You must have a DVI graphic controller or card that:
Has a DVI port in your PC, SUN or Mac system
Supports the maximum graphic resolution of the display that you want to
connect
There are no special requirements regarding:
The memory size, CPU speed and chipsets, if the DVI graphic controller
or card is properly installed
Software, if the DVI graphic controller or card is properly installed in
your Operating System
Power Technical Advisory
: The Kramer Optical DVI Extension Cable is
designed to use +5V internal power supplied through a DVI pin (#14) from
the graphic card. Generally, most computers are incapable of simultaneously
powering two Kramer Optical DVI Extension Cables.
4 Using Your Optical DVI Extension Cable
This section describes how to:
Install the Optical DVI Extension Cable (see section 4.1)
Avoid pitfalls when using it (see section 4.2)
4.1 Installing Your Optical DVI Extension Cable
To connect the Optical DVI Extension Cable, do the following:
1. Carefully remove your Optical DVI Extension Cable
from its packaging.
2. Plug the Transmitter module of the Optical DVI Extension Cable
directly
into the DVI receptacle of the computer.
Do NOT use any intermediate cable or adapter between them
.
The Optical DVI Extension Cable uses only the power +5V supplied
