![background image](http://html.mh-extra.com/html/kramer/690r/690r_user-manual_2001899008.webp)
690T, 690R - Connecting the 690T and the 690R
5
5
4
Connecting the 690T and the 690R
Always switch off the power to any device before connecting it to your
690T
and/or
690R
. After connecting your
690T
and/or
690R
connect
the power and then switch on the power to the device.
To connect the 690T and the 690R as illustrated in the example in
1. Connect up to two SDI sources (for example, 3G-SDI video players) to the
two SDI I
N
connectors.
2. Connect the two SDI O
UT
connectors to up to two SDI acceptors (for
example, 3G-SDI displays).
The SDI 1 IN source signal on the
690T
is always routed to the SDI
1 OUT acceptor on the
690R
and
the SDI 2 IN source signal on the
690T
is always passed to the SDI 2 OUT acceptor on the
690R
3. Remove the dust caps and connect the OPTIC CABLE connector of the
690T
to the OPTIC CABLE connector of the
690R
, via dual single mode
cable (9/12) over LC connectors (a maximum range of 10km (more than 6.2
miles)).
4. Connect the power adapter to the 5V DC socket and to the mains electricity
for both the
690T
and the
690R
(not shown in
).
Avoid direct eye exposure into the optic connectors when powered,
although this product is regulated strictly enough to operate under the
Laser Class 3R for eye safety.
!
i
!