675T
/
675R
Quick Start
P/N:
2900- 301294QS
Rev:
3
Scan for full manual
675T/675R Quick Start Guide
This guide helps you install and use your
675T
/
675R
for the first time.
Go to
www.kramerav.com/downloads/675T
to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
675T
HDMI Optical Transmitter
or
1 Power adapter and cord per device
1 Quick start guide
675R
HDMI Optical Receiver
4 Rubber feet
1 Bracket set per device
Step 2: Get to know your 675T and 675R
675T
#
Feature
Function
1
IN LED
Lights green when a connected source device (with an active HDMI signal) is
detected.
Flashes 4 times green when resetting the device.
Off when a connected source device with an active signal is not detected.
2
OUT LED
Lights green when both a connected HDMI source (with an active HDMI signal) and
a connected far-end HDMI acceptor are detected.
Off if either the source or the acceptor is not connected, or an active signal is not
present.
3
LINK Tx and Rx LEDs
Light green when an optical module is connected and an active optical link is
detected.
Light red when an optical module is connected, but an active optical link is not
detected.
Off when the optical module is disconnected.
4
ON
LED
Lights green when the device receives power.
5
HDMI™ IN Connector
Connect to an HDMI source.
6
OUT IN
SFP+ Connector Opening
Connect the Kramer certified optical module and connect the fiber optic cable to the
module (purchased separately).
7
RESET Recessed Button
Press and hold to reset settings to factory default values.
8
SERVICE Micro USB Port
Connect to a PC to perform firmware upgrade (via K-Upload).
9
12V DC Power Connector
12V DC connector for powering the unit.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
1
2
3
4
5
6
7
8
9
12V DC
