6
631T/R - Using the 631T/631R HDMI Optical Transmitter/Receiver
4
Using the 631T/631R HDMI Optical
Transmitter/Receiver
Always switch off the power to each device before connecting it to your
631T
/
R
. After connecting your
631T
/
R
, connect its power and then
switch on the power to each device.
You can use the
631T
and
631R
to configure an HDMI optical
transmitter and
receiver system. This section describes how to:
Connect the
631T/631R
transmitter and receiver system (see
Section
4.1
)
Operate the
631T/631R
transmitter and receiver system (see
Section
4.2
)
Wire the DDC (CAT 5) RJ-45 connectors (see
Section
4.3
)
Avoid pitfalls (see
Section
4.4
)
4.1
Connecting the 631T/631R HDMI Optical
Transmitter/Receiver
To
connect the
631T
with the
631R
, as the example in
Figure 3
illustrates, do the
following:
1. On the
631T
, connect the HDMI source (for example, a set top box) to the
HDMI IN connector, using the Kramer HDMI copper cable.
Note
: Do not look directly into the LC receptacles of the
631T
, while powered on,
although this product is regulated strictly enough to operate under the Laser Class 1,
classified by CDRH/FDA for eye safety.
2. On the
631R
, connect the HDMI OUT connector to the HDMI acceptor (for
example, a display), using Kramer HDMI copper cable.
3. Remove the module dust covers and connect each duplex LC fiber cable
one-by-one to each of the four LC receptacles of the
631T
and
631R
. The 4
LC patch cord fiber bundled cable lets you transmit 4 channels (R, G, B, and CL
(CLOCK)) of graphic data and multi-channel audio data over it.
Note
: Carefully recheck the polarities and ensure that the duplex connectors are fully
engaged.
4. Connect the DDC RJ-45C connector on the
631T
to the
DDC RJ-45C
connector on the
631R
, via UTP cabling, see
Section
4.3
.
i
