103EQ –
Setting the 103EQ
11
3. Set the Mid frequencies (band 2, from 0.8kHz to 6.5kHz) as follows:
Increase the gain in order to identify the frequency band
Center the frequency to the band of interest
Set the bandwidth accordingly
Adjust the gain to the level required
Tweak the three trimmers (repeatedly) for optimal sound
4. Take a moment to listen to the result.
5. Set the high frequencies (band 3, from 2.2kHz to 16kHz) as follows:
Increase the gain in order to identify the frequency band
Center the frequency to the band of interest
Set the bandwidth accordingly
Adjust the gain to the level required
Tweak the three trimmers (repeatedly) for optimal sound
6. Take a moment to listen to the result.
7. Repeat this process as many times as necessary until you are happy with
the resulting sound.
5.1
Setting the 103EQ to use with the Galil-2 Speakers
The following are the speaker equalizer requirements
:
Band 2
Frequency: 2kHz
Gain: -6dB
1/3 Octave (Q: 4.3)
Band 3
Frequency: 5kHz
Gain: +6dB
1/3 Octave (Q: 4.3)