KRAKEN VEKTA.5 ARTR KV7001/2 INSTRUCTION MANUAL
22
ADJUSTING THE SLIPPER CLUTCH
1.Remove or loosen the retainer screw.
2. Locate the the jam hole on the other side of
the adjusting nut. Use a 4mm driver to secure
the nut. (Caution: Do not jam into the threaded
hole where you just removed the screw from!)
3. While the adjusting nut is secured, rotate
accordingly to loosen or tighten the slipper
assembly.
4. When done, apply some blue threadlock
and screw back in the retainer screw until
snug. Be careful not to overtighten as you may
strip it.
Tip: Alternatively, you can remove the entire
Spur/Slipper assembly and adjust the nut
using a wrench.
1
2
4
3
All manuals and user guides at all-guides.com
