background image

8 | 

English

Rotary hammer

 | 9

ENGLISH

Safety Notes

General Power Tool Safety Warnings

Read  all  safety  warnings  and  all 
instructions. Failure to follow the warnings 
and  instructions  may  result  in  electric 
shock,  fire  and/or  serious  injury.  Save 
all  warnings  and  instructions  for  future 
reference.  The  term  “power  tool”  in  the 
warnings  refers  to  your  mainsoperated 
(corded)  power  tool  or  battery-operated 
(cordless) power tool.

Work area safety

 

▶ Keep work area clean and well lit. Cluttered or dark 

areas invite accidents.

 

▶ Do not operate power tools in explosive atmospheres, 

such as in the presence of flammable liquids, gases or 
dust. Power tools create sparks which may ignite the 
dust or fumes.

 

▶ Keep  children  and  bystanders  away  while  operating 

a  power  tool.  Distractions  can  cause  you  to  lose 
control.

Electrical safety

 

▶ Power tool plugs must match the outlet.

 

▶ Never  modify  the  plug  in  any  way.  Do  not  use  any 

adapter  plugs  with  earthed  (grounded)  power  tools. 
Unmodified  plugs  and    matching  outlets  will  reduce 
risk of electric shock. Avoid body contact with earthed 
or grounded surfaces, such as pipes, radiators, ranges 
and refrigerators.

 

▶ There is an increased risk of electric shock if your body 

is earthed or grounded. Do not expose power tools to 
rain  or  wet  conditions.  Water  entering  a  power  tool 
will increase the risk of electric shock.

 

▶ Do not abuse the cord. Never use the cord for carrying, 

pulling or unplugging the power tool. Keep cord away 
from heat, oil, sharp edges and moving parts. Damaged 
or entangled cords increase the risk of electric shock.

 

▶ When  operating  a  power  tool  outdoors,  use  an 

extension cord suitable for outdoor use. Use of a cord 
suitable for outdoor use reduces the risk of electric 
shock.

 

▶ If  operating  a  power  tool  in  a  damp  location  is 

unavoidable,  use  a  residual  current  device  (RCD) 
protected  supply.  Use  of  an  RCD  reduces  the  risk  of 
electric shock.

Personal safety

 

▶ Stay alert, watch what you are doing and use common 

sense when operating a power tool. Do not use a pow

-

er tool while you are tired or under the influence of 
drugs,  alcohol  or  medication.  A  moment  of  inattenti

-

on while operating power tools may result in serious 
personal injury.

 

▶ Use  personal  protective  equipment.  Always  wear  eye 

protection.  Protective  equipment  such  as  dust  mask, 
non-skid  safety  shoes,  hard  hat,  or  hearing  protecti

-

on used for appropriate conditions will reduce perso

-

nal injuries.

 

▶ Prevent unintentional starting. Ensure the switch is 

in  the  off-position  before  connecting  to  power  sour

-

ce and/or battery pack, picking up or carrying the tool. 
Carrying power tools with your finger on the switch 
or energising power tools that have the switch on in

-

vites accidents.

 

▶ Remove  any  adjusting  key  or  wrench  before  turning 

the power tool on. A wrench or a key left attached to 

a  rotating  part  of  the  power  tool  may  result  in  per

-

sonal injury.

 

▶ Do not overreach. Keep proper footing and balance at 

all  times.  This  enables  better  control  of  the  power 

tool in unexpected situations.

 

▶ Dress properly. Do not wear loose clothing or jewel

-

lery. Keep your hair, clothing and gloves away from mo

-

ving parts. Loose clothes, jewellery or long hair can 

be caught in moving parts.

 

▶ If devices are provided for the connection of dust ex

-

traction  and  collection  facilities,  ensure  these  are 

connected  and  properly  used.  Use  of  dust  collection 
can reduce dust-related hazards.

Power tool use and care

 

▶ Do not force the power tool. Use the correct power 

tool for your application. The correct power tool will 

do  the  job  better  and  safer  at  the  rate  for  which  it 

was designed.

 

▶ Do not use the power tool if the switch does not turn 

it on and off. Any power tool that cannot be control

-

led with the switch is dangerous and must be repaired.

 

▶ Disconnect the plug from the power source and/or the 

battery  pack  from  the  power  tool  before  making  any 
adjustments,  changing  accessories,  or  storing  power 

tools. Such preventive safety measures reduce the risk 

of starting the power tool accidentally.

 

▶ Store idle power tools out of the reach of children 

and do not allow persons unfamiliar with the power 

Summary of Contents for 900 BH 26





















Reviews: