Kraissmann 1850 RW 2P, User Manual, Page: 7 / 16

Mortar mixer | 7
6 |
Deutsch
ENGLISH
⚠ IMPORTANT!
When using equipment, a few safety precautions must be
observed to avoid injuries and damage. Please read the
complete operating manual with due care. Keep this man
-
ual in a safe place, so that the information is available at
all times. If you give the equipment to any other person,
give them these operating instructions as well.
We accept no liability for damage or accidents which arise
due to non-observance of these instructions and the
safety information.
SAFETY REGULATIONS
The corresponding safety information can be found in the
enclosed booklet.
⚠ CAUTION!
Read all safety regulations and instructions. Any errors
made in following the safety regulations and instructions
may result in an electric shock, fire and/or serious injury.
Keep all safety regulations and instructions in a safe
place for future use.
Additional safety instructions
▶ The equipment must never be used in surroundings
where an explosive atmosphere exists. Never mix in
solvents or substances containing solvent that have
flashpoints below 21°C.
▶ Do not let the cable touch any parts of your body.
▶ Only use the extension cable approved for use in the
working area.
▶ The unit must only be started and stopped when it is
inside a mixing vessel. Ensure that the mixing vessel is
placed on a solid, secure base.
▶ Never reach into the mixing vessel with your hands or
any other object during the mixing process.
▶ When working with the mixer, we recommend that you
wear work gloves, goggles and ear protectors.
▶ Wearing close-fitting clothes is mandatory.
▶ Always allow for reaction torque.
▶ Take the reaction torque into account. During opera -
tion always hold the equipment firmly in both hands.
PROPER USE
The machine has been designed to mix liquid and powderery
building materials such as paint, mortar, adhesive, plaster
and similar substances. The relevant mixing action (which
depends on the consistancy of the materials and the quan
-
tity that has to be mixed) must be set up for the appropri -
ate mixing tool.
The equipment is to be used only for its prescribed pur
-
pose. Any other use is deemed to be a case of misuse. The
user / operator and not the manufacturer will be liable
for any damage or injuries of any kind caused as a result
of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in com
-
mercial, trade or industrial businesses or for equivalent
purposes.
TECHNICAL DATA
Power, W ................................................................ 1850
Voltage, V ..................................................................
230
Frequency, Hz ............................................................. 50
No load speed:
Mode 1, min-1................................................
150-300
Mode 2, min-1................................................
300-650
Tool holder .............................................................. M14
Stirrer paddle diameter, mm ..............................
160
Sound and vibration
Sound and vibration values were measured in accordance
with EN 60745.
L pA sound pressure level ...................
84,5 dB(A)
K pA uncertainty ................................................... 3 dB
L WA sound power level ......................
95,5 dB(A)
K WA uncertainty ................................................. 3 dB
Wear ear-muffs
The impact of noise can cause damage to hearing. Total
vibration values (vector sum of three directions) deter
-
mined in accordance with EN 60745.
Mixing of paint and mortar
Vibration emission value a h = 2.92 m/s2
K uncertainty = 1.5 m/s2
⚠ IMPORTANT!
The vibration value changes according to the area of ap -
plication of the electric tool and may exceed the specified
value in exceptional circumstances.