4
No
QTY
Description
31
32
33
34
35
36
37
1
1
1
1
1
1
1
Spring cap
Spring
Release valve rod
Knob
Pin 5x25
O-ring
Spring for pump
No
QTY
Description
38
39
40
41
42
43
44
1
2
1
2
4
4
4
Subulate spring
Subulate bolt
Saddle
Wheel stand
Bolt 12
Washer 12
Caster
No
QTY
Description
45
46
47
48
49
4
4
2
2
1
Spring washer 10
Screw M10x25
Screw M8x20
Spring washer 8
Link rod
Caution:
1. For safety, the load can not beyond the rated capacity.
2. The centre of the load should be the same as the centre of the transmission jack.
3. After putting the load on it use a safety chain.
4. Use always safety stand when working under a lifted load.
5. There must be enough synthetic spindle oil in the cylinder for a smooth operation.
6. When remove the transmission jack, the saddle must be at the lowest position.
7. Keep the removal parts oiled to avoid a dust layer.
DECLARATION OF CONFORMITY
Model:
38198
Transmission jack 0.5 t
KRAFTWERK Sàrl,
25 rue due Stade, F-67870 Bischoffsheim
Declares under sole responsibility that the product to which this declaration relates is in conformity with the following
standard(s) or other normative document(s):
Following the provisions of Directive(s)
Machinery Directive:
Bischoffsheim, 28/02/2018
2006/42/EC
EN 1494: 2000+A1/2008
EN ISO 12100: 2010
EN ISO 13857: 2008
EN 349: 1993+A1/2008
Alexander Pieper
CEO
WARRANTY
We do not take responsibility for any damage caused by misuse or any use that is not in
compliance with the safety standards described herein.
CUSTOMER SERVICES
Contact your local importer of your specialized
dealer to obtain address of our service
department.
FROM DATE OF PURCHASE RECEIPT
2 YEAR GUARANTEE
ON MATERIAL OR PRODUCTION DEFECTS
www.kraftwerktools.com
KRAFTWERK Europe AG
Mettlenbachstrasse 23
CH-8617 Mönchaltorf
Switzerland
Tel. +41-44 949 40 50
KRAFTWERK Sàrl.
25, rue du Stade
F – 67870 Bischoffsheim
France
Tel. +33-388 48 64 50
