4
MAINTENANCE
1. When the body repair kit is not in use, the pump unit should be
stored with the release valve open.
2. To check oil level, place the pump unit in an upright position. As
indicated on the diagram opposite. Remove the dip stick and the
oil level will be indicated. If required add hydraulic oil until it is
level with the full mark on the stem.
3. After extensive use, the oil supply should be replaced to ensure
longer equipment life. To drain, remove the dip stick and open
release valve. Ensure that no dirt gets into the system. Refill with
approved jack oil.
IMPORTANT:
USE ONLY CERTIFIED HYDRAULIC OIL WHEN TOPPING UP AND
REPLACING THE OIL.
www.KRAFTWERKtools.com
EN 1494: 2000+A1/2008
DECLARATION OF CONFORMITY
Model:
38125
Portable hydraulic body repair kit 10 t
KRAFTWERK Sàrl,
25 rue due Stade, F-67870 Bischoffsheim
Declares under sole responsibility that the product to which this declaration relates is in conformity with the following
standard(s) or other normative document(s):
Following the provisions of Directive(s)
Machinery Directive:
Bischoffsheim, 28/02/2013
2006/42/EC
Patrick Wyss
President