20
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE
ХОЛОДИЛЬНИК
REFRIGERATOR
21
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE
ХОЛОДИЛЬНИК
REFRIGERATOR
3. Re-plugging in the power plug at the interval of over ten minutes.
4. Don’t store bottled drink in the freezer, so as to prevent from being broken and
damaging the refrigerator.
5. Open the door as less as possible during power-cut.
6. When defrosting, never use any sharp or metallic objects to remove the frost on the
surface of the evaporator as it will damage the evaporator.
7. Don’t touch foods and containers in the freezing compartment with your wet hands
so as to prevent from being frostbitten.
Maintenance
1. While cleaning the refrigerator, pull out the electric power plug, rub carefully with a
piece of cloth soaked with natural cleanser then wipe with clean water. The abrasive
cleaning power, alkali cleansers, chemical cloth, thinner, alcohol, acid petroleum
product and hot water are not suitable for cleaning the refrigerator, they may damage
the painting cover and plastics.
2. The door gasket is dirty and fogged easily, so clean it frequently.
3. If the refrigerator is out of use for a long time, please pull out the plug, clean and dry
the freezing compartment then close the door tightly.
The following cases are not malfunction
1.
A flowing water sound:
Flowing water sound will be heard under normal operation.
2
. Outside condensation:
Outside condensation is normal in high humidity condition. You may just wipe it up
yourself.
3. It takes some times for the temperature of the freezer and refrigerator compartments
to become cold after the refrigerator starts to operate: If the temperature of the two
compartments is higher while the refrigerator is operating, it takes some times for
the temperature of the two compartments to become cold. If the environmental
temperature is higher, it takes a long time to make the compartments to become
cold.
4.
The surface of the compressor becomes hot:
The surface of the compressor may become hot under normal operation. Don’t touch
it with hands.
Methods of inspecting malfunction
If any case of malfunction happens, please inspect and dispel it according to the
methods shown in the following table.
Сase
Inspection
Not refrigerating
Is there no electric current?
Is the voltage normal or not?
Has the socket fused?
Has the plug been put in effectively?
Not efficient
Is the thermostatic dial set to the
correct position?
Is there any suitable clearance
surrounding the refrigerator?
Has the door been opened too
frequently or too long?
Is the refrigerator exposed to sunlight
directly or placed near some heating
devices.
Are there too much food inside?
Or are too hot?
Food frozen in the refrigerator
Compartment
Is the thermostatic dial set to the
correct position?
Have the foods stuff been put too
crowded?
Noises
Is the refrigerator installed firmly?
Has the refrigerator been struck by
some other objects?
Compressor Cannot stop automatically
Are the foods stored too much at one
setting?
Are the doors opened too frequently or
too long?
If the above methods are not yet effective, please contact with the maintenance
service department for help without any delay.
DANGER or WARNING:
1. Risk of child entrapment. Before you throw away your old refrigerator or freezer:
- Take off doors.
- Leave the shelves in place so that children may not easily climb inside.
2. Do not use extension cords.
