manualshive.com logo in svg

KRACK FEV 11, Installation And Operation Manual

Share
Download
KRACK FEV 11 Installation And Operation Manual Download Page 25

Fluid Cooler Series Air-Cooled Fluid Cooling Units (PN E208134_D) 

24

 

 

4 RIGGING 

Fluid Coolers are designed to be lifted using the leg support channels or the side lifting brackets for larger 
units. The unit mounting leg assemblies are best attached when the unit is in the flat, fans facing up, and 
supported by the rigging. Take special care not to bump, hit, or otherwise stress the tubing, headers, or 
connections during the lifting and positioning of the unit. Under no circumstances should the coil headers 
or return bends be used in lifting or moving the unit. See Figures 8 and 9 for the designated lifting points 
and lift methods for all unit sizes plus approximate unit weights. 

 

FIGURE 8 RIGGING AND LIFTING FOR 30

″

 FAN UNITS – UNITS WITH A,C,E,F AND K 

MOTORS 

 

 

NOTE

: STATIONARY LIFTING POINTS AND LIFTING PLATES FACTORY MOUNTED. OUTER SUPPORT 

LEGS (IF REQUIRED) SHIPPED LOOSE FOR FIELD INSTALLATION BY OTHERS WITH NECESSARY 
BOLTS, WASHERS AND NUTS INCLUDED, (SEE SECTION 5.1 FOR LEG MOUNTING INSTRUCTIONS). 
UNDER NO CIRCUMSTANCES SHOULD CONSIDER MANIFOLDS, ELECTRICAL ENCLOSURE(S) OR 
RETURN BENDS BE USE FOR LIFTING OR MOVING THE UNITS! 

Summary of Contents for FEV 11


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands