Krabat Sheriff S1, User Manual

Page: 9 / 19

9
Place the child on the saddle seat and tighten the belt.
Make sure the child is placed well into the seat in the
midline position with symmetry in the legs / lower body.
Use the hip belt both to maintain the position in the
saddle seat and to reduce the risk of falling out of the
chair. It should be used at all times. The angle of the seat
can be adjusted by loosen 4 screws under the seat, using
the accompanying 4 mm Allen key (fig. 03) Adjust the
angle to desired position and tighten the screws.
It is important to tighten the screws properly after
adjustment.
The height of the seat can be adjusted by 2 screws under
the seat, where the rods are sticking up from the frame
(fig. 04). Simply loosen the screws and place the height
of the seat in desired position.
It is important to tighten the screws properly after
adjustment.
The height of the backrest can be adjusted and fixed
using the locking lever (fig 05). Open the locking lever
and fix it firmly at desired height. If the locking lever
does not fix the backrest properly, it can be tighten using
the plastic ring under the lever.
Angle of seat
Height of the seat
Height of the backrest
Fig. 03
Adjusting the angle of the seat
Fig. 04
Adjusting the height of the seat
Fig. 05
Adjusting the height of the backrest
The tipping point can be adjusted by moving the seat
forward or backward along the frame. Simply loosen
two screws under the seat using the accompanying 4
mm Allen key (fig. 06). Slide the seat into desired
position and tighten the screws properly.
However, we recommend a representative from Krabat
AS together with the local therapist for this adjustment.
This is to ensure optimal point of tipping and safe use of
the wheelchair. When changing the point of tipping we
also alter the tipping angle.
It is important to tighten the screws properly after
adjustment.
Adjusting the tipping point
Fig. 05
Back height adjustment