The height of the board is altered by simply loosening the M5 screw using the accompanying 4 mm Allen key. Put
the board at desired height and tighten the M5 screw securely. The lowest track in the two front rods indicates
maximum height.
The front board
can be fixed in two positions. Remove the upholstery on the front board and loosen the 4 M4
screws using the accompanying. Fix the board in desired position according to the premade holes.
The back board
can be fixed in three different positions. Simply loosen the 4 M5 screws on each side using the
accompanying 4 mm Allen key. Pull the board out to desired length and tighten.
Adjustment of the board
Adjusting the length of the board
04.1
04.2
The accompanying Allen key is mounted on the
bottom of the aid
Screws for adjustment of the front board
Use the accompanying Allen key on the screw in front
Screws for adjustment of the back board
The front board can be set in to different positions, and the back board in three different positions
8
Krabat
Pilot
Summary of Contents for Pilot
Page 1: ...Krabat Pilot User manual Krabat Pilot ...
Page 4: ...4 Krabat Pilot ...
Page 14: ...Notes 08 0 14 Krabat Pilot ...
Page 15: ......