12
03.3 - Angle of the sitting unit
03.4 - Angle and height of backrest
Note: The turnbuckle has a spring loaded plunger
functioning as a mechanical end stop.
If the end stop is engaged when increasing the
seat angle, it has to be released if seat angle is to
be decreased. Release the end stop by pulling the
plunger and turn the adjusting tube on the
turnbuckle to adjust the seat angle.
Fig. 08
Turnbuckle end stop plunger
End stop plunger
Place the child on the saddle seat and tighten the
hip belt. Make sure the child is placed well into the
seat in the midline position with symmetry in the
legs / lower body. Use the hip belt to both maintain
the position in the saddle seat and to reduce the
risk of falling out of the chair. The hip belt should
be used at all times when Krabat jockey is in use.
The angle of the sitting unit can be adjusted using
the turnbuckle underneath the seat. The angle is
self locking and does not need to be fixed.
Fig. 07
Adjustment of the seat angle using the turnbuckle
The angle of the backrest can be adjusted and fixed
using the locking lever. If the locking lever does not fix
the backrest properly, it can be tighten adjusting the
plastic ring under the lever. The height of the backrest
can be adjusted by loosening the locking lever before
sliding the backrest up or down in 5 different position,
each with 1 cm interval. Remember to fix or tighten the
locking lever when you have achieved the correct
height.
Fig. 09
Adjustment of the angle and height of the backrest
Summary of Contents for Jockey
Page 1: ...Jockey Jockey Plus User manual ...
Page 4: ...4 ...
