MIK820 Quick Start Manual, V1.0
Page 12 of 14
device. The SAR value is determined at the highest certified power level in
laboratory conditions, but the actual SAR level of the wireless device while
operating can be well below the value. This is because the wireless device
is designed to use the minimum power required to reach the network.
All models of KPN's wireless device are designed to meet radio frequency
exposure guidelines such as European Council Recommendation and
Federal Communications Commission Notice (United States).
European Council Recommendation:
Before a wireless device model is
available for sale to the public, it must be tested according to the technical
standard-EN 50361 and not exceed the limit established by the European
Council Recommendation: 1999/519/EC for safe exposure.
The SAR limit adopted by the 1999/519/EC is 2.0 watts/kilogram (W/kg)
averaged over ten gram of tissue. The highest SAR value for this device
type when tested is 0.408 W/kg..
[EN 50361 scope states "This basic standard applies to any
electromagnetic field (EM) transmitting devices intended to be used with
the radiating part of the equipment in close proximity to the human ear
including mobile phones, cordless phones, etc. The frequency range is 300
MHz to 3 GHz. Therefore, the above text does not address primary use of
the wireless device product.]
Federal Communications Commission Notice (United States):
Before a
wireless device model is available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the limit established by the
government-adopted requirement for safe exposure.
The SAR limit adopted by the USA and Canada is 1.6 watts/kilogram (W/kg)
averaged over one gram of tissue. The highest SAR value for this device
type when tested for use is 1.13W/kg. [There is no reference to the specific
reference standard or its applicability to the intended use of the product.]
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
