22
FACING AND FINISHING
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
#BAY-36-L & BW R.8 July 2019
4.3 Exterior Trim Kit Assembly
IMPORTANT: This exterior trim kit is supplied with and for use only with
safety barrier #B36-RSF2.
IMPORTANT: Exterior trim kit assembly must be attached before
fireplace installation.
NOTE: The top trim panel must be installed with the top stand off
brackets.
1. If installed, remove the top stand-offs.
2. Install the exterior trim top panel. Align the holes in the top trim
panel with the front holes in the stand-offs and attach to the
fireplace top. Secure with the screws previously removed and
included in the components packet.
3. If installed, remove the nailing flanges from the sides of the
fireplace.
4. Install exterior trim side panels, utilizing the existing screws from
the top and bottom sides of the fireplace. Install nailing flanges
after trim panels, using screws previously removed. Use screws
included in the components packet to complete side panel
installation.
Figure 4.6, Exterior Trim Kit Installation #B36-081