Position log #2, aligning notches in bottom of log to brackets in burner cover.
Position base logs #1, #3 & #4, aligning mounting holes in bottom of logs to corresponding mounting studs on burner cover.
Place logs #5, #6, & #7 over base logs, nesting them into corresponding notched out sections in base logs.
1
3
2
4
5
6
7
PAGE 19
#BRK-500 LOG SET INSTALLATION
ATTENTION: If converting to LP (propane) gas, do so now before installing log set. Follow instructions included with conversion kit.
NOTE: Log numbers are located on bottom of each log. Refer to following instructions and illustrations for proper placement.
CAUTION: Do not place logs directly over burner port holes. Improper log placement may affect flame appearance and cause excessive
soot to build up on logs and glass.
Use a steel or stiff bristle nylon brush to distribute Rock Wool Embers onto logs and burner.
Summary of Contents for 56150
Page 35: ...PAGE 35 ...
Page 36: ...PAGE 36 ...
