Koyoe KY-EST06KH, User Manual

Page: 64 / 86

64
The meter mode is
：
SDM630MCT(40mA)
The meter manufacture is:
：
EASTRON
8.11.
Generation
Limit and Export Limit Control
User can set the mode through the following steps Generation Limit and Export Limit Control,
These two functions are in accordance with of AS/NZS 4777.2:2020 section 6.
8.11.1
. Soft export Limit Control
Users can set the output power of the inverter through THE LCD (Soft export Limit Control); The
operation steps are as follows:
Step 1: Press the "Enter" button in the main interface to ENTER the interface below, select the
"Settings" option through the "Up" button and the "Down" button, and then press the
"Enter" button to ENTER the next level menu.
Step 2: After entering the following menu, select the option of "Power regulation setting" through
the "Up" and "Down" buttons, and then press the "Enter" button to Enter the next menu.
Step 3: After entering the following menu, enter the password through the "Up" button and "Down"
button to enter the next menu. Power management information is an important parameter,
in order to ensure the safety of users and set, password can be obtained by consulting
customer service.
Step 4: After entering the password correctly, the user can access the following menu. You can
use up or down keys to select "Soft Limit Control " and press ENTER. Press the up or
down key to select "Export Limit Control " to limit the power output. After the Settings are
Be careful!
TO use this setup
，
the meter must peproprly connected