
5
1
O
p
e
ra
ti
o
n i
n
s
tr
u
c
ti
o
n
Under power on condition,the indicator light of power will be twinkling,and
then press it will be turned on.The multi-color,the carbon fiber heater,and the
far infrared heater will be turn on at the same time.The display show 45
℃
temperature for 5 seconds, if there's no any operation, 5 seconds later it will
renew to the temperature of nature.The setted time when it turn on is 30
minutes, at the same time,the indicator light will turn on.Press again, it will
turn off and turn off all of the function and display
Press infrared sauna group A/B to start infrared sauna fuction.
Press infrared sauna key the first time with 100% power,
Second time power90%,
Third time power80%,
Fourth time power70%,
While fifth time to close it.
Under turn on condition,press time+ / time- ,the time will be downwards or
upwards 1 minute,press the key about 1 second,it will be automatically quickly
adjusting.The scale of time adjusting is 01-99 minutes.
Under turn on condition,press temp/temperature-,the time will be
downwards or upwards 1
℃
,press the key about 1 second,it will be quickly
adjusting automatically.The scale of temperature adjusting is 35
~
60
℃
.When
the temperature inside reach to the setted temperature,the system will adjust
the power into 70%.When temperature inside is 2
℃
lower than the setted
temperature,the system will adjust the power into 100% power.
Press color light key to adjust the color lamp by hand.It works circularly from
white/green/yellow/blue/red/turn off.Top lamp is controled by the key
within15minutes after shut down the control panel. The control system will
turn off multh-color lamp function automatically aftor shuting the system for is
minutes,Once turn on power,white is acquiescence.
1.Turn on/Turn off
2. Infrared sauna
3.Time/Temperature setting
4.Multi-color top lamp
Summary of Contents for 05-k1
