KOWATEC CORPORATION
Tel: 1-408-432-4826
Page 3 of 4
To re-record any section or all the sections, you must erase the previous section first. Otherwise, you will hear a beep
sound indicating there is already data in that section to avoid accidentally overwriting the data.
Connecting the accessories
1.
Once the recording is finished and tested the playback, turn off the power of battery holder, unplug the Q Card from
the Q Writer.
2.
Connect the speaker to the Speaker I/O pin, battery (6v) to the Power I/O.
3.
Connect one wire of the trigger buttons or switches to the corresponding S1-S7 I/O pins and the second wire to
GND. Note S8 is not used for triggers.
4.
Press the buttons S1-S7 to playback the corresponding recordings.
T
riggering buttons can be tact switches, tilt switches, PIR motion sensors, light sensors,
