Kowa VX-20, Instruction Manual, Page: 53 / 88

37
4 Other functions
4.5 Additional adjustment of the flash int5 or more,
-
5 or less)
You may use this function to compensate the flash in-
tensity beyond the compensation range allowed with the
flash intensity compensation knob.
When the flash intensity compensation knob is turned to
+5, a " FLASH UP button” appears on the LCD monitor
that allows adjustment to higher flash intensity. Pressing
the button once increases the flash intensity by one level.
Similarly, when the flash intensity compensation knob is
turned to ─ 5, a “FLASH DOWN button” appears on the
LCD monitor that allows adjustment to lower flash inten-
sity.
These buttons allow adjustment to the maximum flash in-
tensity of 300W and the minimum flash intensity of 0.6W.
If you change the setting on the flash intensity compen-
sation knob while making an additional adjustment to
flash intensity, the adjustment made with the flash inten-
sity compensation knob precedes.
4.6 Blue/Brown button
The Blue/Brown button allows you to set the flash inten-
sity suitable for the iris pigment.
The standard setting at the factory default is “Brown”.
When you press the Blue/Brown button, “Blue” appear
on the screen and the flash intensity reduces by approxi-
mately 2.5 EV.
The new setting is enabled until you press the button
again.
4.7 Customize button
“Customize buttons” allow you to easily switch to pre-
set camera sensitivity, aperture size, and flash intensity
magnification.
Three customize buttons are available. For the methods
for changing the defaults, effects and targets, and setting
values, refer to 5.4.2 Customize button .
“Customize buttons” are enabled at any time during the
capture mode.
Some photography modes, however, may not allow cer-
tain settings.
EXIT
R ID: No ID
50W
Blue
SP4.0
Central
D+
50
。
NON-MYD
FLASHDOWN FLASH UP
VIEWER
FIXATION USER1
USER2
USER3