Koukaam NETIO-230B, Instruction Manual

Page: 7 / 22

Figure 3: device set-up
3. Choose the proper device from the list and click Device setup .
Window appears for set-up of network parameters - IP address, Subnet mask and Gateway. (Fig-
ure 4)
Figure 4: set-up of network parameters
After input of requested changes based on your network environment, click Change IP . Changes
are made to the device settings. Utility will update the settings of your NETIO and show device
list with changed parameters.
If there is DHCP server in your network and you are not willing
to change the set-up network parameters manually, just skip to the next step. The default
IP address is 192.168.10.100 – if there is no DHCP server in the network. If a DHCP server
exists, the device gets the address from the DHCP.
4. Web management could be opened both by typing the IP address of NETIO into your internet
6