n
Before you can use the Solar Portal, the inverter must send its data to
the PIKO Solar Portal. Once the 1st commissioning communication
between the inverter and the Solar Portal has been established, the
user can carry out the registration process and then add the inverter to
the user's system.
n
The local network settings must be set at the inverter in order to estab‐
lish a connection to the Internet portal server. This can be performed
automatically or manually:
Automatically
: If IP addresses are automatically assigned in your net‐
work (DHCP), then no settings need to be made at the inverter.
Manually
: If IP addresses are not automatically assigned in your net‐
work, then you must manually set the inverter network settings via
Settings
▶
Network
n
The address of the PIKO Solar Portal is permanently stored in the
inverter and cannot be changed.
n
Once the network connection is established, the inverter automatically
starts non-encrypted transmission of data to the server.
The network cable must be disconnected in order to prevent
transmission of the data, or data transmission must be dis‐
abled according to
Furthermore, you can use the inverter interface to display yield data and
other information as HTML pages via the internal web server. You need a
PC connection to indicate the data. The web server can be called up via a
browser (e.g. Mozilla Firefox or Internet Explorer). To enable the connec‐
tion, enter the IP address of the inverter (see inverter status indication) in
the input line of the browser (e.g. http://192.168.103.168). To enable the
connection, enter the IP address of the inverter (see inverter status indica‐
tion) in the browser.
Fig. 2:
Example 1 of an HTML page
Structure and function
11/2017 | DOC01664604 | KOSTAL operating instructions PIKO inverter 1.5 - 4.2 MP
22
Summary of Contents for PIKO 1.5 MP
Page 1: ...PIKO 1 5 4 2 MP Operating instructions...
Page 79: ......
