●
Before detection, ensure that your current
fuel level is in the lowest position that you
would like to have.
●
Stop the vehicle for a few seconds to
allow the fuel surface to become steady,
then start the detection of the resistance.
●
●
4-2-2
Fuel Level Resistance Auto
Detection Settings
●
Press the
Select button
to enter the lowest
fuel level's resistance auto detection screen.
●
Press the
Select button twice
to go back
to the highest fuel level's resistance
setting screen.
●
Ex: To change the highest fuel level
setting from 0 to 10 Ω.
●
Press the
Adjust button
to detect the
lowest fuel level's resistance.
●
Press the
Select button 5 times
to enter
the lowest fuel level resistance auto
detection screen.
●
Ex. Automatically detected the lowest fuel
level resistance value as 90 Ω.
●
If the fuel surface sensor float is
in the highest position then it will detect the
resistance is around 4 - 10 Ω.
The highest position
The lowest position
●
If the fuel surface sensor float in the lowest
position then it will detect the resistance
around 90 - 100 Ω.
●
Press the
Adjust button
to detect the
highest fuel level resistance.
●
Press the
Select button 5 times
to go
back to the fuel gauge resistance.
●
Ex. Automatically detected the highest fuel
level resistance value as 10 Ω.
●
Press the
Adjust button
to enter the Clock
(Hr / Min) setting screen.
4-3
Clock setting
●
Press the
Select button
to enter the Clock
(Hr / Min) setting screen.
Cursor moving order is
:
Hour >
ten minutes > minutes
●
Ex: Changing the hour to 10.
●
Press the
Adjust button
to choose the
setting number.
Setting Range:
ON (Clock function enable)
OFF ( Clock function disable)
NOTE
NOTE
Setting range: 0 ~ 23 H.
NOTE
The setting value will flash!
●
Press the
Select button
to enter the clock
minutes setting screen.
●
Ex: To Change the setting from 0:00
to 10:00.
Setting range: 00 ~ 59 minutes.
NOTE
The setting value will flash!
●
Ex: To change the minutes to 10.
●
Press the
Select button
to the digit you
want to set.
●
Press the
Select button
to go back to the
clock (Hr / Min)setting screen.
●
Ex: To change the setting from
10:00 to 10:10.
●
Press the
Adjust button
to select the
Backlight brightness setting.
●
Press the
Adjust button
to choose the
setting number.
Before detection, ensure that your current
fuel level is in the highest position that you
would like to have.
Stop the vehicle for a few seconds to
allow the fuel surface to become steady,
then start the detection of the resistance.
P.S.
P.S.
